Integrated Closed-Loop Stepper Motor
-
ZLTECH Nema17 0.5/0.7Nm 18V-36V integrated step-servo motor with encoder
Outline
ZLIS42 is a 2 phase hybrid step-servo motor with high-performance digital integrated drive. The system has a simple structure and high integration. This series of integrated closed-loop stepper motors use the latest 32-bit dedicated DSP chip for motor control, and use advanced digital filter control technology, resonance vibration suppression technology and precise current control technology to enable the two-phase hybrid stepper motor to achieve precise and stable operation . This series of integrated closed-loop stepper motors have the characteristics of large torque output, low noise, low vibration, and low heat, which are especially suitable for electronic processing equipment, laser processing, medical and small numerical control equipment.
-
ZLTECH Nema23 0.9N.m 18V-28VDC encoder CANopen integrated step-servo motor
Outline
The ZLIS57C is a 2 phase digital step-servo motor with high-performance digital integrated driver. The system has a simple structure and high integration, and adds bus communication and single-axis controller functions. The bus communication adopts CAN bus interface, and supports CiA301 and CiA402 sub-protocols of the CANopen protocol.
-
ZLTECH 2phase 42mm 0.7N.m 24V 2000RPM b integrated stepper motor and driver
The 42 open-loop stepper series is divided into two types, ZLIM42-05, ZLIM42-07
-
ZLTECH 57mm Nema23 integrated step motor with driver for cut machine
ZLIS57 is a 2 phase hybrid step-servo motor with high-performance digital integrated drive. The system has a simple structure and high integration. This series of integrated closed-loop stepper motors use the latest 32-bit dedicated DSP chip for motor control, and use advanced digital filter control technology, resonance vibration suppression technology and precise current control technology to enable the two-phase hybrid stepper motor to achieve precise and stable operation . This series of integrated closed-loop stepper motors have the characteristics of large torque output, low noise, low vibration, and low heat, which are especially suitable for electronic processing equipment, laser processing, medical and small numerical control equipment.
-
ZLTECH 42mm 24V 1.5A 0.5N.m CANopen integrated step motor and driver for 3D printer
The 42 open-loop stepper CANOPEN series is divided into two types, ZLIM42C-05, ZLIM42C-07
ZLTECH Nema17 0.5-0.7N.M 18V-28VDC CANopen Integrated Step-Servo Motor
The performance of the 42 open-loop CANIPEN stepper series is as follows：
Shaft: Single shaft
Size: Nema 17
step angle: 1.8°
Ebcoder: 2500-wire Magnetic
Input voltage(VDC): 20-48
Output current peak(A):1.5
shaft diameter(mm): 5/8
shaft length(mm): 24
Holding Torque(N.m): 0.5/0.7
Speed(RPM): 2000
Weight(g): 430g
Motor Length(mm)；70/82
Motor total Length(mm)： 94/106
-
ZLTECH Nema23 encoder CANopen integrated step-servo motor
Conventional integrated stepper motor needs a lot of wiring to link the driver and controller. Zhongling Technology’s latest integrated stepper motor with CANopen bus control solves the wiring problem of conventional integrated stepper motor. The ZLIM57C is a 2 phase digital step-servo motor with high-performance digital integrated driver. The system has a simple structure and high integration, and adds bus communication and single-axis controller functions. The bus communication adopts CAN bus interface, and supports CiA301 and CiA402 sub-protocols of the CANopen protocol.
-
ZLTECH CANOPEN 42mm 0.5N.m 24V DC integrated step motor with encoder for plotter
The 42 closed-loop stepper CANOPEN series is divided into two types, ZLIS42C-05, ZLIS42C-07
ZLTECH Nema17 0.5-0.7N.M 18V-28VDC CANopen Integrated Step-Servo Motor with encoder
The performance of the 42 closed-loop CANIPEN stepper series is as follows：
Shaft: Single shaft
Size: Nema 17
step angle: 1.8°
Ebcoder: 2500-wire Magnetic
Input voltage(VDC):18-36
Output current peak(A):1.5
shaft diameter(mm): 5/8
shaft length(mm): 24
Holding Torque(N.m): 0.5/0.7
Speed(RPM): 2000
Weight(g): 430g
Motor Length(mm)；70/82
Motor total Length(mm)： 94/106
-
ZLTECH Nema23 closed loop integrated step motor for CNC
ZLIS42 is a 2 phase hybrid step-servo motor with high-performance digital integrated drive. The system has a simple structure and high integration. This series of integrated closed-loop stepper motors use the latest 32-bit dedicated DSP chip for motor control, and use advanced digital filter control technology, resonance vibration suppression technology and precise current control technology to enable the two-phase hybrid stepper motor to achieve precise and stable operation . This series of integrated closed-loop stepper motors have the characteristics of large torque output, low noise, low vibration, and low heat, which are especially suitable for electronic processing equipment, laser processing, medical and small numerical control equipment.