2022 China New Design 1.8 Degree Dc Stepper Motor - ZLTECH 42mm Nema17 24VDC stepping motor for industrial automation – ZhongLing

Short Description:

Product Detail

Product Tags

Feedback (2)

Our solutions are widely recognized and trusted by consumers and will meet up with constantly developing financial and social requires for 16inch Brushless Amr Drive Motor Wheel, 500w Gearless Wheelchair Drive Motor, 14nch Brushless Agv Drive Wheel, We hope we can have a friendly relationship with businessman from all over the world.

2022 China New Design 1.8 Degree Dc Stepper Motor - ZLTECH 42mm Nema17 24VDC stepping motor for industrial automation – ZhongLing Detail:

Advantages of stepper motor

The rotation Angle of the motor is proportional to the pulse number.
The motor has the maximum torque when stopping (when winding excitation).
Due to the accuracy of each step in 3% to 5%, and will not accumulate the error of one step to the next step, so it has a good position accuracy and repeatability of motion.
Excellent start-stop and reversal response.
Because there is no brush, high reliability, so the life of the motor only depends on the life of the bearing.
The response of the motor is only determined by the digital input pulse, so the open-loop control can be used, which makes the structure of the motor can be relatively simple and the cost can be controlled.
Simply connecting the load directly to the rotating shaft of the motor can also rotate synchronously at very low speeds.
Since the speed is proportional to the pulse frequency, there is a wide range of speed.

Parameters

Item	ZL42HS03	ZL42HS07
	hybrid	hybrid
Shaft	Single Shaft	Single Shaft
Size	Nema17	Nema17
step angle	1.8°	1.8°
Step Accuracy	±5%	±5%
Temperature(°C)	85 Max	85 Max
Ambient Temperature(°C)	-20~+50	-20~+50
Ambient humidity (%)	20% RH~90% RH	20% RH~90% RH
Insulation Resistance	100MΩ Min 500VC DC	100MΩ Min 500VC DC
Dielectric Strength	500VAC 1 minute	500VAC 1 minute
shaft diameter(mm)	5	5
shaft extension(mm)	platform(0.5*15)	platform(0.5*15)
shaft length(mm)	24	24
Holding Torque(N.m)	0.48	0.75
Rated Current(A)	2	2
Phase Resistance(Ω)	1.35	1.75
Phase Inductance(mH)	2.9	3.7
Rotor Inertia(g.cm2)	77	110
Lead Wire(No.)	4	4
Weight(kg)	0.36	0.5
Motor Length(mm)	48.1	60.1

Dimension

product description1 product description2

Application

product description3

Packing

product description3

Production & Inspection Device

product description4

Qualification & Certification

product description5

Office & Factory

product description6

Cooperation

product description7

Product detail pictures:

Related Product Guide:

The corporation upholds the philosophy of "Be No.1 in high quality, be rooted on credit rating and trustworthiness for growth", will continue to serve outdated and new consumers from home and overseas whole-heatedly for 2022 China New Design 1.8 Degree Dc Stepper Motor - ZLTECH 42mm Nema17 24VDC stepping motor for industrial automation – ZhongLing , The product will supply to all over the world, such as: Ukraine, Singapore, Sri Lanka, Our company regards "reasonable prices, high quality,efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits in future. Welcome to contact us.

1.8 Degree Electric Dc Stepper Driver